Fast, Reliable Mold Remediation Across Bloomington
Mold remediation in Bloomington typically costs between $1,800 and $6,500 depending on the affected square footage and whether crawlspace treatment or air quality restoration is required. Most jobs in the 55420 ZIP take two to four days once containment is set. If you’re seeing black staining on drywall, smelling musty air that won’t clear, or noticing peeling paint near the baseboards of a postwar rambler, call (888) 690-6095. Wade Ferris answers his own phone, and he’ll tell you straight whether you need full remediation or a targeted cleaning.
We work throughout Bloomington, from the Nine Mile Creek corridor to the neighborhoods off Old Shakopee Road and along the Minnesota River floodplain. Our Mold Remediation team knows this city’s housing stock, its drainage patterns, and the specific ways moisture finds its way into a 1950s split-level or a slab-on-grade rambler. That local knowledge changes the scope of work, and it changes the price you should pay.
Key Takeaways
- Mold in Bloomington’s 55420 ZIP often starts under the slab, not from a visible leak, because of hydrostatic pressure and Nine Mile Creek’s drainage pattern.
- Inspection and testing runs $300-$650; full remediation of a finished basement typically lands between $2,500 and $6,500.
- Wade’s Restoration answers calls live, 24/7. No voicemail, no answering service.
- Every mold job is covered by the 90-Day Done Right Promise, in writing.
- We deal with your insurance adjuster directly. You don’t relay messages between two sides.
Why Wade’s Restoration of Minneapolis Is Bloomington’s Preferred Mold Remediation Company
Wade Ferris founded this company in 2007 and still runs it like a neighbor, because that’s what he is. His name is on the truck, his address is published, and he’ll run into you again at the hardware store. That’s the oldest accountability mechanism there is, and it’s why homeowners in Bloomington call us instead of a national chain that quoted one price on the phone and another at the door.
We’ve treated mold in Bloomington long enough to know the difference between a Nine Mile Creek surcharge backup and a slow plumbing drip behind a bathroom vanity. That distinction matters. One requires sewage-category drying and full containment. The other might be a $400 targeted removal. Wade’s crew shows up with professional-grade equipment from Dri-Eaz, XPOWER, and B-Air, takes moisture readings every single day, and hands you the full log when the job’s done. Almost nobody in this trade does that.
When you call, Wade answers. He can have a crew at your Bloomington home within the hour for emergency extraction, and he’ll give you a no-hassle upfront price before work starts. IICRC-certified, RIA-affiliated, background-checked. And the 90-Day Done Right Promise is stamped on every single mold restoration contract. If it’s not done right, he makes it right.
Our Mold Remediation Services in Bloomington
Mold Inspection & Testing
Inspection and testing in Bloomington runs $300-$650 for a full assessment with air sampling and surface swabs. Given the 55420 housing stock’s age and slab-on-grade foundations, we almost always include moisture mapping with infrared and penetrating meters. That’s how you find the mold that isn’t visible yet, the stuff behind baseboards and under carpet tack strips in a 1960s rambler.
Mold Removal
Full containment mold removal in Bloomington typically starts around $2,500 for a single room and runs to $6,500 or more for finished basements and multi-room spread. Our crews set negative air pressure with HEPA scrubbers, remove affected drywall and insulation, and clean every surface with professional-grade antimicrobials. Not bleach spray on drywall. That’s a recipe for Stachybotrys in 48 hours, especially in this city’s humid spring thaw conditions.
Black Mold Remediation
Stachybotrys, what people call black mold, needs a cellulose food source and constant moisture. Bloomington’s postwar ramblers with original drywall and minimal vapor barriers provide both. Remediation of black mold usually adds 20-40% to a standard removal scope because the colony often extends deeper than visible staining suggests. We test before and after so you know the air is actually clean, not just visually clear.
Air Quality Restoration
After removal, we run HEPA air scrubbers for 24-72 hours and retest. In Bloomington homes near Nine Mile Creek, outdoor spore counts spike after heavy rain and spring snowmelt. The air quality restoration step is not optional here. It’s the difference between a job that holds and one that recurs in six months. Expect $400-$900 for this phase, often rolled into the full remediation quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bloomington
Wade’s crew runs professional-grade equipment from Dri-Eaz, XPOWER, and B-Air on every Bloomington job. We stock HEPA filters, antimicrobials, and vapor barrier materials locally, which means faster turnaround when a Nine Mile Creek surcharge event hits multiple homes on the same street. Our IICRC and RIA credentials back the work, and the equipment we bring is the same gear the industry’s top restoration firms run. No rental-shop dehumidifiers that can’t pull a slab-on-grade home below 15% moisture content during April melt.
Common Mold Remediation Problems We See in Bloomington Homes
- Slab-on-grade hydrostatic pressure: In the 55420 ZIP, mold often originates under the slab from groundwater pressure, not from a visible leak. This failure mode is rare in neighboring Richfield where basements are more common, and it requires a different treatment approach: crawlspace-side drying, not just interior cleanup.
- Nine Mile Creek sump failures: When heavy rain surcharges the creek, sump pumps in finished basements two or three blocks from the waterway fail and dump sewage-laden water. Mold takes hold under baseboards within a week if the area isn’t dried below 15% moisture content within 48 hours.
- Paper-faced drywall and bleach: Bloomington’s 1950s ramblers are full of paper-faced drywall that wicks moisture from slab-on-grade humidity. DIY bleach spray leaves the cellulose wet and feeds black mold growth. We’ve seen it dozens of times.
- Standard dehumidifiers in spring thaw: A standard residential dehumidifier cannot handle Bloomington’s April humidity when snowmelt and creek overflow hit simultaneously. Drywall stays at 20%+ moisture content, and hidden mold grows behind vapor barriers. Low-grain refrigerant units are required, and that’s what we bring.
Pricing for Mold Remediation in Bloomington, MN
Here’s what Bloomington homeowners can expect to pay, based on the work we’ve actually done in this city:
- Inspection and testing: $300-$650
- Single-room mold removal: $2,500-$4,000
- Finished basement remediation: $4,000-$6,500
- Crawl space treatment with vapor barrier: $1,800-$3,500
- Air quality restoration and retesting: $400-$900
- Moisture and humidity control system installation: $1,200-$2,800
What moves the price: the affected square footage, whether sewage-category water was involved, how long the mold has been active, and whether the slab-on-grade foundation requires crawl space treatment. We give you a written scope before work starts. No surprise add-ons. And we offer a free second opinion on any written estimate you’ve received from another company. Call (888) 690-6095 and Wade will walk you through it.
We Also Serve Cities Near Bloomington
Besides our work throughout Bloomington, we regularly handle mold remediation in Richfield, Edina, Savage, and Burnsville. If you’re in one of those communities and dealing with a moisture problem, the same crew, the same equipment, and the same 90-Day Done Right Promise apply. One call gets Wade on the phone.
Serving Bloomington, MN - Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Bloomington
No, Bloomington does not require a standalone permit for mold remediation itself. However, if the work involves structural repairs, plumbing corrections, or crawlspace encapsulation that alters the drainage pattern, Hennepin County floodplain rules may apply, especially near Nine Mile Creek or the Minnesota River corridor. Wade’s team handles the paperwork side so you don’t have to chase it down. Call (888) 690-6095 and we’ll check your specific address.
The pattern tells you. Nine Mile Creek surcharge backups leave a water line that follows the floor slope, often with sewage debris and a dark ring at the same height on multiple walls. A plumbing leak is localized, with mold concentrated near a fixture or pipe. Our moisture mapping and inspection will identify the source definitively, and we’ll document it for your insurance adjuster. A 1958 rambler off Old Shakopee Road taught us to check the sump pit first, every time.
Black mold (Stachybotrys chartarum) is a toxic species that grows on wet cellulose, like drywall paper and wood framing. Mildew is a surface fungus that wipes off non-porous surfaces like tile. In a Bloomington split-level with original 1960s drywall, black mold often starts behind walls where humidity from slab-on-grade foundations feeds it. Testing is the only way to know. We run that test.
Yes, and it often does. In slab-on-grade ramblers in the 55420 ZIP, air circulates from the crawlspace or under-slab cavity up through wall cavities and into living spaces. Mold spores travel the same path. We treated a 1958 rambler on a cul-de-sac near Nine Mile Creek where the slab had wicked moisture for years, and the spores had reached the finished rec room through the sill plate. Air quality restoration fixed what the homeowner couldn’t see. We used a Dri-Eaz LGR 7000XLi, XPOWER air movers, and B-Air Hepa 500 air scrubbers, then installed an injectable vapor barrier along the foundation’s interior face to stop capillary rise.
Most single-room mold remediation in a Bloomington ranch house takes two to three days from containment to final air clearance. A full finished basement with crawl space treatment typically runs five to seven days. The drying phase is what takes time, especially during spring thaw when Nine Mile Creek is high and outdoor humidity fights the dehumidifiers. Wade gives you a written timeline before work starts, and the 90-Day Done Right Promise covers you if anything comes back.
If you’re seeing mold, smelling it, or just worried about what’s behind the drywall in your Bloomington home, call (888) 690-6095. Wade answers his own phone, and he’ll give you a straight answer and a free estimate. No charge for that.
Written by Wade Ferris, Owner at Wade’s Restoration of Minneapolis, serving Bloomington and surrounding communities since 2007.