Fast, Reliable Mold Remediation Across Stillwater
Mold remediation in Stillwater typically runs $1,800 to $6,500 depending on square footage, wall material, and whether the moisture source is a river flood, a basement seep, or a roof leak. Most jobs in Stillwater are done within 3 to 7 days, with the exception of our historical masonry work, which deliberately runs slower to protect the old brick and plaster. If you’re seeing dark patches on a bathroom ceiling or catching a musty smell in a finished basement on the north hill, call Wade’s Restoration at (888) 690-6095. We answer the phone ourselves, and we can have a certified mold tech at your door in Stillwater the same day you call.
Why Wade’s Restoration of Minneapolis Is Stillwater’s Preferred Mold Remediation Company
Wade Ferris started this company in 2007 because he got tired of national outfits that quoted one price over the phone and a different one at the door. That does not happen here. Wade’s name is on the truck, his license number is published, and he is going to run into you again at the hardware store on Main Street or the Dairy Queen on Frontage Road. That is the oldest accountability mechanism there is, and it works.
Stillwater homeowners call us for two reasons. First, we understand what a 19th-century house actually is. The Victorians on the bluff, the brick storefronts on Water Street, the hillside homes with limestone foundations: these are not drywall and OSB jobs. Second, we document everything. Wade’s crew takes moisture readings every single day and hands you the full log at the end of the job. Almost nobody in the trade does that. Deal with your adjuster directly? We do that too. You never have to relay messages between two sides.
We serve all of Stillwater, including 55082 and 55083, with live-answer phones 24/7. No voicemail, no answering service. You call, a person picks up, and Wade heads out.
Our Mold Remediation Services in Stillwater
Mold Inspection & Testing in Stillwater
A mold inspection in Stillwater costs $250 to $500 and includes visual assessment, moisture mapping, and air or surface sampling when needed. Older homes on the bluff and in the downtown district almost always hide moisture behind horsehair plaster, under original wood floors, or inside balloon-framed exterior walls. A standard home inspector is not looking for that. We are.
Mold Removal & Remediation in Stillwater
Mold removal in a typical Stillwater basement or bathroom runs $1,200 to $4,000. The work involves containment, HEPA air scrubbing, removal of damaged material, anti-microbial treatment, and structural drying. In pre-1900 homes we adjust that process. Lime-mortar brick and horsehair plaster cannot take aggressive heat drying without cracking, so our Mold Remediation team slows the airflow and extends the timeline. The mold still dies. The wall stays intact.
Black Mold Remediation in Stillwater
Black mold, or Stachybotrys, in a Stillwater basement usually costs $2,000 to $6,500 to remove safely. This is the one homeowners fear most, and for good reason: it moves fast in damp, dark, poorly ventilated spaces, which describes a lot of 1920s and earlier basements in Stillwater. We contain the area under negative air pressure, remove contaminated material in sealed bags, and treat the framing with EPA-registered anti-microbials. Then we hand you the moisture log and the post-remediation verification report.
Air Quality Restoration in Stillwater
Air quality restoration after a flood or a hidden leak in Stillwater runs $600 to $1,800 and typically includes HEPA air scrubbing, duct cleaning, and post-remediation air sampling. This matters more in Stillwater than most places because the old homes here were built to breathe, and they do: through lime-mortar joints, through original wood floors, through plaster keys. That same porosity that makes the homes charming also lets mold spores circulate room to room if you do not treat the air, not just the wall.
Crawl Space Treatment in Stillwater
Hillside homes in Stillwater, especially those on the steep grade west of downtown, almost always have a crawl space that collects groundwater. Crawl space mold treatment runs $800 to $2,500 depending on square footage, access, and whether we need to install a vapor barrier or a dehumidifier. Moisture here is not a one-time event. The bluff funnels rain and snowmelt straight into foundations, so if you only treat the mold and not the water path, you’ll be calling us again by next spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stillwater
Wade’s crew runs professional-grade equipment from Phoenix, XPOWER, and B-Air on Stillwater jobs, and we keep spare parts and filters on the truck so we are not waiting on a supplier when your basement is damp. For crawl space and hidden-wall cavity work we use Injectidry systems that push air into places standard fans cannot reach. None of this is rented from a big-box store. It is our gear, maintained by our people, and it is sized right for the tight, old, and oddly shaped spaces we see across Stillwater.
Common Mold Remediation Problems We See in Stillwater Homes
- Hidden mold behind horsehair plaster. In Victorian and Italianate homes from the 1870s to 1910s, mold grows behind the plaster keys, not on the surface. You see nothing. You smell something. By the time paint starts bubbling, the wall cavity is often fully colonized.
- Re-wetting in 1860s-1900s brick basements. Old common brick absorbs water deeply and releases it slowly. A crew that calls the job done when the surface reads dry has missed the salt-laden moisture still working its way out. That re-wetting is what triggers the next mold bloom.
- Bluff-side groundwater intrusion. On the steep hillsides of the north and west bluffs, spring snowmelt and heavy rain run straight down into unreinforced stone and brick foundations. You can remediate the mold today and have a wet wall again in six weeks if the drainage path is not addressed.
- Knob-and-tube wiring complicating the work. Many older Stillwater homes still have live knob-and-tube in the walls and ceilings where mold hides. You cannot safely spray, cut, or remove material around live old wiring without knowing what you are doing. We check for it before we open a wall.
Pricing for Mold Remediation in Stillwater, MN
A small bathroom mold job in Stillwater runs $800 to $1,500. A full basement remediation with containment and structural drying runs $3,000 to $6,500. A crawl space under a hillside home with vapor barrier and dehumidifier installation usually lands between $1,500 and $4,000. Inspection and testing add $250 to $500. What moves the number: square footage, wall material (plaster and brick cost more to treat than drywall), access, and whether your insurance carrier is involved. We bill insurance directly and provide the photo documentation and moisture logs adjusters need. Estimates in Stillwater are free, and our second-opinion offer on any written estimate is also free. Call (888) 690-6095 and Wade will give you a straight number.
Mold Remediation in Stillwater’s Historic Downtown: What Actually Works
Stillwater’s lower downtown sits in a documented St. Croix River flood zone. Spring ice jams and snowmelt have been pushing river water into the 19th-century brick commercial blocks along Water Street and the surrounding low-lying blocks since the buildings were new. The buildings were constructed between the 1860s and 1900 using lime mortar, horsehair plaster, and old-growth balloon framing. They cannot be treated like a 1990s Woodbury split-level. Aggressive drying schedules that work on modern drywall and OSB will spall or crack the old masonry. The common brick used in 1880s Stillwater construction absorbs water deeply and re-releases it slowly, carrying salts to the surface. If you dry too fast, you trap that moisture inside and the mold comes back behind the plaster. Our crew worked an 1880s brick storefront on Water Street after spring ice-jam flooding. We ran Phoenix axial air movers at reduced airflow and extended the drying timeline deliberately to protect the old common brick. Then we treated the hidden mold behind the horsehair plaster with anti-microbial and returned the space to safe use without cracking the heritage masonry. That is how you do Mold Remediation in Stillwater without doing structural damage in the process.
We Also Serve Cities Near Stillwater
Wade’s Restoration serves Stillwater and the surrounding communities, including Mahtomedi, Lake Elmo, North Saint Paul, and Oakdale. Call (888) 690-6095 and we will have a truck headed your way, whether you are on the bluffs above the St. Croix or in a 1950s rambler a few miles south.
Serving Stillwater, MN - Our Local Coverage Area
We’re based in the Stillwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Stillwater
Mold remediation in 1880s brick buildings requires slower, lower-heat drying because the lime-mortar and common brick absorb water deeply and will crack or spall under aggressive airflow. We also treat the plaster, not just the surface, because mold colonizes behind the keys where you cannot see it. Call (888) 690-6095 and ask Wade about the Water Street storefront we dried after spring flooding.
Yes, in many cases we can treat mold behind horsehair plaster without removing the wall. We cut small access points, run Injectidry tubes into the wall cavity, treat with anti-microbial, and dry at a conservative rate that protects the plaster. Whether we save the wall depends on how long the mold has been active. Call (888) 690-6095 for an inspection and we’ll tell you straight.
We use XPOWER and B-Air air movers sized for confined spaces, Injectidry systems for hidden wall and under-floor cavities, and Phoenix dehumidifiers that handle the high humidity common under Stillwater’s bluff homes. Wade’s crew is used to working on their knees under 1930s additions with barely two feet of clearance. Call (888) 690-6095 to schedule a crawl space assessment.
The short answer: we do not rush the dry-out. Old brick and stone basements need moisture monitoring for weeks, not days. We take daily readings, document the log, and adjust airflow as the salts and moisture migrate out of the masonry. We also address drainage on the water path so the next snowmelt does not re-soak the wall. Call (888) 690-6095 and Wade will walk you through what we did on Water Street.
Yes. Before we open any wall in an older Stillwater home, we check for live knob-and-tube wiring, asbestos in plaster or pipe wrap, and lead paint. Mold remediation in these homes requires safety procedures that modern subdivision work never needs. We are trained and equipped for all of it. Call (888) 690-6095 and mention the age of your home when you schedule.
Call Wade’s Restoration for Mold Remediation in Stillwater
If you have mold, a musty smell, or water damage in Stillwater, call Wade at (888) 690-6095. You will get a real person, a straight answer, and a crew that knows the difference between a 1880s brick wall and a 1980s drywall partition. Free estimates. No trip charge inside our county. Senior and veteran discounts always apply. And every mold job carries the 90-Day Done Right Promise in writing. If it is not done right, Wade comes back and makes it right.
Written by Wade Ferris, Owner at Wade’s Restoration of Minneapolis, serving Stillwater and the St. Croix Valley.